There are many kinds of industrial floor coatings, different kinds of epoxy floor coatings have different properties; different ground conditions, performance and customer requirements of floor coatings are not the same, so what should customers choose industrial floor coatings? Based on more than 16 years of construction experience of floor paint, the following factors for selecting industrial floor paint varieties are summarized for your reference.
Many modern industries, such as medicine, cosmetics, food, beverage, chemistry and electronics, have the same hygiene requirements. The manufacturing process of these industries requires a clean room-like working environment, such as the ground must be completely dust-free, free of cracks and right angles, easy to clean, and able to meet other requirements. Such as resistance to chemical corrosion and wear resistance.
The degree of skid resistance of pedestrian area depends on the dry and humidity of the environment. When considering the surface requirements of the ground, we should pay attention to the better skid resistance. However, rough surfaces are difficult to achieve cleanliness and hygiene requirements, so they need to be balanced. Therefore, experts from China Epoxy Resin Industry Association suggest that different anti-skid requirements should be taken into account to design floors and meet other requirements.
3. Impact / point load
In cases where goods are often stored or handled centrally in certain areas, such as production lines, warehouses, loading terminals, etc., the floor design must be suitable for these specified working conditions. The movement of trucks, pallets, etc. loaded with cargo will produce pressure loads, which can easily be damaged if the local load design is not reserved. It is also important to ensure that the stresses generated are not higher than those of the entire floor system material.
4. Mechanical wear
Industrial floor design should consider physical requirements such as impact resistance and mechanical wear. Usually, the greatest wear and tear occurs in forklift passages or in specific areas where special treatment is required.
5, chemical corrosion resistance
Consideration should be given not only to the effect of the presence of a single chemical on the ground, but also to potential chemical reactions. What if chemicals were mixed on the ground? What is the thickest or thinnest concentration of spatter or evaporation? High temperature often improves the activity of chemicals, especially strong acids and strong bases. In some potential splash areas such as production, warehouses and freight areas, temperature is also an important factor.
The dramatic change in temperature is the main cause of the failure of the traditional epoxy industrial floor. Therefore, it is very important to consider not only the operating machine temperature and the product temperature of the production process, but also the temperature of the adjacent area. In some areas, activities such as high-pressure cooking, cooking, disinfection or freezing are often carried out, and the temperature is often in extreme conditions, so these areas need special treatment.
Today's environment requires surface coatings to be impermeable to protect concrete and groundwater from dripping water and pollutants. Sometimes impermeable ground is only used to prevent the penetration of chemically corrosive liquid contaminants, such as metalworking, zinc plating, food processing (dairy products, meat, vegetables), and cleaning with chemicals such as detergents, steam and machinery.
标簽:   配资盘 配资盘施工 地坪 配资盘塗料 配资盘漆