We all know that waterborne epoxy floor paint is water-based solvent, no harmful substances volatilization in the construction process, and good adhesion to the concrete floor, as well as excellent wear resistance, pressure resistance and impact resistance, so it has been widely used. Compared with other floor paint construction technology, water-borne epoxy floor paint construction technology requirements are relatively high, below the epoxy floor paint manufacturers to give you a detailed description. Waterborne epoxy floor paint has good environmental protection performance and does not contain organic solvents or volatile organic compounds. Water-borne epoxy floor paint will become an inevitable trend in the development of coatings to meet the current environmental protection requirements. The construction technology of waterborne epoxy floor paint can be divided into five steps, including polishing treatment of foundation floor, primer construction, increasing thickness of middle coating, rolling coating and maintenance, etc. Each step is very important, but as long as the material proportion and construction requirements are complied with, the construction can basically be completed.1、要保證基礎地面滿足施工條件，沒有起砂起殼、坑坑窪窪等情況，如果以灰塵的話，還需要清理幹淨。基礎的好壞直接影響了整個水性的質量，就算材料再好，基礎沒有處理好的話，依然會有各種問題出現。
1. To ensure that the foundation ground meets the construction conditions, there is no case of sanding, shelling, pits and depressions. If dust is used, it needs to be cleaned up. The quality of the foundation directly affects the quality of the whole waterborne epoxy floor. Even if the material is good and the foundation is not handled properly, there will still be various problems.2、底塗施工。将混凝土基材處理完畢并清理幹淨後就可進行底塗(輥塗或刷塗)，輥塗或刷塗應均勻，厚薄一致，該底塗具有一定的透水氣功能，能增強基材強度并增加塗層對基材的附着力。
2. Primer construction. After the concrete base material is treated and cleaned up, the bottom coating (roll coating or brush coating) can be carried out. The roll coating or brush coating should be uniform and uniform in thickness. The bottom coating has a certain permeability function, which can enhance the strength of the base material and increase the adhesion of the coating to the base material.3、中塗施工。一般要求的厚度都體現在了中塗上，地坪強度以及承受力也是由水性環氧中塗完成，光磊水性環氧中塗可以添加2.5-3倍的填料，包括水泥、石英砂和滑石粉，按配比進行攪拌施工。
3. Medium coating construction. Generally, the required thickness of the floor is reflected in the middle coating, and the strength and bearing capacity of the floor are also finished by the water-borne epoxy coating. The Guanglei water-borne epoxy coating can add 2.5-3 times the filler, including cement, quartz sand and talcum powder, and mix construction according to the proportion.4、滾塗面漆。先将水性配资盘面漆按用量标準進行混合，充分攪拌均勻後進行面漆施工，在進行这個步驟施工時，需要分兩步走，先用刮塗的方式進行全面整體的施工，然後待第一遍水性面漆完全幹燥後再用滾塗或噴塗的方式進行全面整體的施工。水性環氧面漆的顔色可以根據國标色卡進行調制，滾塗施工，輕松搞定。
4. Rolling finish. Water-borne epoxy flooring top coatings are mixed according to the dosage standard, fully stirred and evenly mixed before finishing. In this step of construction, it is necessary to take two steps. First, the overall construction is carried out by scratching, and then the whole construction is carried out by rolling or spraying after the first pass of water-borne top coatings are completely dried. The color of waterborne epoxy topcoat can be adjusted according to the national standard color card, roll coating construction, easy to fix.5、養護。水性配资盘漆面層實幹需要24H，在这期間應進行封鎖，比免影響表面潔淨光滑的效果。3d後方可上人，完工保養7天後方可正式投入使用(25℃为準，低溫時需适度延長)。
5. Maintenance. Waterborne epoxy flooring paint requires 24H to dry. During this period, it should be blocked, so as not to affect the effect of surface cleanliness and smoothness. It can be put into use only after 3 days and 7 days of completion and maintenance (25 C, moderately prolonged at low temperature).
标簽:   地坪 配资盘漆 配资盘 無錫配资盘 配资盘施工